Printer Friendly / Create PDF
WasteCare Corporation
Shredders & Grinders
Medium Capacity
44-4515 MEDIUM CAPACITY SHREDDERS
Request Detailed Quote or other information - (Secure Area)
Request Automated Response with general price information
Standard Features
- Production Rate up to 1 - 2 tons MSW or other waste materials, hard drives, passenger tires, scrap, plastic, paper etc
- Shaft Center Distance: 8.3"
- Dual Drive - Electric & Hydraulic
- Infeed Opening - Starting @ 20" x 24"
- Hopper - Standard or Ram Feed Hopper
- Controls: UL and/or CE approved PLC Controller and Soft Start Motors
- HP Optional (Typically up to 40 HP but can be increased)
- Shaft Material - 4140 or 4340 Hardened Alloy Steel
| Shear Shredder - Model 44-4515 | |
| Main Motor for Rotor - (HP / KW) - Standard | 15 HP - 11 KW (UP to 40 HP) |
| Shaft Center Distance (inches / mm) | 8.3 inches / 210.82mm |
| Output Per Hour - Solid Waste | Up to 1.5.Tons per Hour |
| Dual Drive | Electric & Hydraulic |
| Shaft Size for Hex Shaft (inches / mm) | 3 inches - 76.2mm |
| Cutter Diameter (inches / mm) | 9.3 Inches - 236.22 mm |
| Cutter Thickness on Standard Machine (inches / mm) | 1.5 inches - 38.1 mm |
| Lowest RPM of Shafts on Standard Machine | 4 |
| Length of Smallest Infeed Opening - (Inches / mm) | 24" / 609.6 mm |
| Width of Smallest Infeed Opening - (Inches / mm) | 20" / 508 mm |
| Maximum Special Design Infeed Opening - (Inches / mm) | 42 inches / 1066.8 mm |
| Length of Shredder Floor Plan - (Inches / mm) | 60" / 1524 mm |
| Width of Shredder Floor Plan - (Inches / mm) | 40" / 1016 mm |
| Height of Shredder Floor Plan - (Inches / mm) | 55" / 1397 mm |
| Shaft Material | 4140 or 4130 Hardened Alloy |
| Cutter Material | 4140. 4340 or D2 Steel |
| Passenger Tires per Hour from Reported Facilities | 50 |
| Machine Weight / Approx: - (lbs / kg) | 4,500 lbs / 2045 kg |
Most Common Available Options
- Conveyors
- Optional HP Motors
- Larger Infeed Opening
- Spare Parts Kit
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures.