Printer Friendly / Create PDF

WasteCare Corporation is your source for commercial trash compactors, balers, waste equipment, recycling equipment, industrial shredders and grinders, and other waste related products and services.

PEEWEE™ CLASS of WASTE & RECYCLING EQUIPMENT

Small, Low Cost Waste & Recycling Equipment with Powerful Waste Reduction Results

For those who are looking to address more specific waste & recycling needs that can be easily managed with small, low cost equipment, the PeeWee™ class of Waste & Recycling Equipment can fill those voids. Oftentimes the smaller equipment can be a good starting point for initiating a change in waste processing routines that can evolve into much bigger changes and waste reduction savings over time. Until Waste & Recycling equipment is actually implemented it is sometimes difficult to understand the streamlining benefits that are realized (which usually cannot be quantified on paper or in a 'line item' of accounting).  By starting with small equipment and gaining an understanding of the overall benefits of Waste and Recycling Equipment, it can be helpful in validating payback decisions for the larger purchases.

Overview Chart

PeeWee Mini Baler - (P3-2820)

	Bale Size	28" W x 20" D x 26" H	Bale Materials & Weight Examples ('Up to' wt. in lbs.)
	Bale Volume	6 Cubic Feet	Cardboard  - 65-110 lbs
	Cycle Time	18 seconds	Plastic Film / Wrap - 85 - 130 lbs
	Noise Level (db)	65 - 68 db
	Force	Up to 6,600 lbs
	Electrical / Motor	1.5 HP
	Overall Dimensions	Height: 77" -  Width: 33" -  Depth: 29" - Depth (Door Open): 58"

Textile Clothing PeeWee Mini Baler - (TC-2820)

	Bale Size	28" W x 20" D x 14" - 26" H	Bale Materials & Weight Examples ('Up to' wt. in lbs.)
	Bale Volume	6 Cubic Feet	Textiles / Clothing  - 90 - 230 lbs
			Cardboard - 65 - 110 lbs
	Cycle Time	18 seconds	Plastic Film / Wrap - 85 - 130 lbs
	Stroke	22
	Force	Up to 6,600 lbs
	Electrical / Motor	1.5 HP
	Overall Dimensions	Height: 86" -  Width: 38" -  Depth: 30" - Depth (Door Open): 57"

Mini Baler Space Saver - (MB-2818)

	Bale Size	28" W x 20" D x 20" - 28" H	Bale Materials & Weight Examples ('Up to' wt. in lbs.)
	Bale Volume	9 Cubic Feet	Cardboard - 65 - 90 lbs
	Cycle Time	27 seconds	Plastic Film / Wrap - 80 - 110 lbs
	Cylinder	25" Stroke
	Force	3,300 lbs
	Electrical / Motor	1.5 HP
	Overall Dimensions	Height: 79" -  Width: 34" -  Depth (Door Open): 54"

Manual Compactor - (MC-55)  

	Drum Sizes	55 Gallon & 30 Gal / up to.27 Cu Yds or 7 cu ft	Typical Materials Compacted
	Drum Clearance	Height: 41"   Width: 25.75"	Regular Trash / Garbage
	Compacted Volume	Roughly 1.10 - 1.35 Cubic Yds.	Plastic / Shrink Wrap
	Compaction Ratio	p to 4 to 1 Reduction	Cardboard & Paper
	Stroke	35"	Cans
	Force	Up to 4,000 lbs
	Overall Dimensions	Height: 96";- Width (with Handle): 50"; Depth: 28"

Hydraulic Drum Ready Compactor - (PA-55-6) 

	Drum Sizes	55 5Gallon & 30 Gal / / up to.27 Cu Yds or 7 cu ft	Bale Materials & Weight Examples ('Up to' wt. in lbs.)
	Drum Clearance	Height: 41"   Width: 25.75"	Regular Trash / Garbage
	Compacted Volume	Roughly 1.10 - 1.35 Cubic Yds.	Plastic / Shrink Wrap
	Compaction Ratio	Up to 4 to 1 Reduction	Cardboard & Paper
	Cylinder	6" - Bore, 24" Stroke	Cans
	Force	Up to 4,000 lbs
	Overall Dimensions	Height: 76";- Width: 36"; Depth: 27"

Pail and Filter Crusher - (PFC-1512)  

 

	Materials	Pails or Buckets up to 15" in height	Bale Materials & Weight Examples ('Up to' wt. in lbs.)
	Air Requirements	Minimum 85 psi - Maximum 115 psi	Pails or Buckets - Up to 15" in HT & 12" Dia.
	Cycle Time	2 minutes for containers 15" in height	Filters - Up to 15" in HT & 12" Diameter.
	Power Cylinder	Air Piston, 3 bellow
	Force	13,000 lbs @ 100 psi
	Weight	Approximately 300 Lbs with Stand
	Overall Dimensions	Height: 44" - Width: 22" - Depth: 21"

Note: Specifications, Dimensions & any other data may vary and is subject to change without notice Unless otherwise specifically noted, dimensions exclude options and standard 'perimeter buffer' that is required around equipment for normal operating area