Printer Friendly / Create PDF
WasteCare Corporation is your source for commercial trash compactors, balers, waste equipment, recycling equipment, industrial shredders and grinders, and other waste related products and services.
HIGH DENSITY 60" VERTICAL CARDBOARD BALER
60-1548 Specifications, Details & Diagram
Request a Detailed Quote or other information - (Secure Area)
Request an Automated Response with general price information
Jump Back to Overview Page for this Baler
For our Quick Lookup Comparison Chart on 60" Vertical Balers Click Here
60" High Density Vertical Baler Performance Information |
||||
Bale Size |
60-1548-BS |
30” x 48” x 60” |
||
Bale Volume |
60-1548-BV |
50 Cubic Feet |
||
Cycle Time |
60-1548-CT |
48 Seconds (No Load) With 7" Cylinder Upgrade - 62 Seconds |
||
Estimated (Up to) Bale Weights |
||||
Material |
Bale Weight |
Density Lbs/Cu Ft – Loose/Baled |
Bales / Hr |
|
OCC - Cardboard |
1,000 Lbs |
2.5 / 24 |
Up to 2 |
|
Shredded ONP - Newspaper |
1,100 Lbs |
2.5 / 26 |
Up to 2 |
|
Plastic / Shrink Wrap |
800 Lbs |
1.5 / 16 |
Up to 2 |
|
Plastic / Shrink Wrap (W/ Sharks Teeth) |
1,000 Lbs |
2.5 / 24 |
Up to 2 |
|
PET (Requires 'Beef-Up' Add-On) |
300 - 400 Lbs |
1 /7 |
Up to .75 |
|
Clothes (Requires 'Beef-Up' Add-On) |
1,100 Lbs |
4 / 22 |
Up to 2 |
|
With 7" Cylinder Upgrade Package - Bale Weight Examples |
||||
OCC - Cardboard |
1,265 Lbs |
2.5 / 25 |
Up to 2 |
|
Shredded ONP - Newspaper |
1,430 Lbs. |
2.5 / 28 |
Up to 2 |
|
PET |
500 Lbs |
1 / 10 |
Up to .75 |
|
Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables. *For baling strictly plastic wrap it may be helpful to add the Shark's Teeth option. |
||||
60" High Density Vertical Baler - Hydraulics |
||
Main Pumps |
60-1548-MP |
9.6 GPM @1,800 RPM Fixed Volume Vane - 12.5 GPM w Upgrade |
System Pressure |
60-1548-SP |
2600 PSI Maximum; 2350 PSI Operating |
Main Cylinder |
60-1548-MC |
6” Bore, 3.5” Rod, 48” Stroke |
| Cylinder / Bore with Upgrade | 60-1548-UP |
7" Bore, 4.5" Rod, 48" Stroke |
Ram Face Pressure |
60-1548-FP |
45.26 PSI * With Upgrade Pkg - 56 psi Max; 50 psi Operating |
Overall Platen Force |
60-1548-PF |
73,502 Lbs - *90,438 lbs with 7" Cylinder Upgrade Package |
Oil Reservoir |
60-1548-OR |
30 Gallon Capacity |
Hydraulic Manifold |
60-1548-HM |
D05 Pattern, Internal Relief Valve Subplate Circuit |
60" High Density Vertical Baler - Electrical |
||
Main Motor |
60-1548-MM |
15 HP - 208/230/460v – 3 Phase |
Enclosure |
60-1548-EN |
NEMA 12 - Rated |
Controls |
60-1548-CL |
UL / CUL Listed |
Motor Type |
60-1548-MT |
TEFC High Efficiency |
60" High Density Vertical Baler - Dimensions & Structural |
||
Height |
60-1548-H |
143 |
Width |
60-1548-W |
80 |
Depth |
60-1548-D |
45 |
Depth (Door Open) |
60-1548-DO |
102 |
Frame Design |
60-1548-FD |
10” Channel Side Rails - 12” Channel Headers |
3” x 3” Tube Steel Discharge Door Supports |
||
Solid Door Charge |
||
8 Pieces of 4” Channel in Sub Floor |
||
Feed Opening |
60-1548-FO |
27” x 60” Charge Dimensions 23” x 60” |
Weight |
60-1548-WT |
5,000 lbs - *Add approx 400 lbs with Upgrade Package |
Other Features of the 60" High Density Baler |
|
| 60-1548 | UL Listed |
| 60-1548 | Product meets or exceeds all ANSI Z245.5 and OSHA standards. |
| 60-1548 | Product has NEMA 12 |
| 60-1548 | Bale Height Adjustable |
| 60-1548 | Safety Interlock Circuit on Bale Door & Safety Gate |
| 60-1548 | Counterbalanced Feed Door for Easy Open |
| 60-1548 | 3 – 6” Retainer Bale Dogs Front and Back |
| 60-1548 | Soft Shift, Low Shock Hydraulic Circuit |
| 60-1548 | Dual Chain Semi-Automatic Bale Ejection System |
| 60-1548 | Platen Roller Guides |
| 60-1548 | Spring Doors |
| 60-1548 | Factory Wired for Easy Installation |
| 60-1548 | Structural frames reinforced in high stress areas, plus other heavy duty 'extras'. |
Other Options of the 60" High Density Vertical Baler |
|
| 60-1548-SU | Set-Up |
60-1548-01 |
Slotted Discharge Door |
60-1548-02 |
Single Phase Motor (Only available on 10 HP Balers) |
| 60-1548-03 | Front Load – Rear Eject |
| 60-1548-04 | Oil Heater |
| 60-1548-05 | Special Voltage – 575V |
| 60-1548-06 | Sharks Teeth (Note: If Sharks Teeth are added Baler will not work well with Cardboard Baling) |
| 60-1548-07 | Weatherproof |
| 60-1548-08 | Drum Crusher |
| 60-1548-09 | Extra Heavy Duty Package (Heavily beefed up Frame for tougher materials like PET & clothes) |
60-1548-10 |
Special Paint Color |
60-1548-15 |
Wire Turnaround |
60-1548-16 |
Non-Flammable Oil |
60-1548-20 |
7" Cylinder Upgrade Package |
60-1548-21 |
Automated Rear Chute without Conveyor |
60-1548-22 |
Automated Rear Chute with Conveyor |
60" High Density Vertical Baler Diagram - 60-1548
A = 68" B = 80" C = 54" D = 108" E = 143" F = 45" G = 102" H = 76" I = 54"
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures.
