Printer Friendly / Create PDF
WasteCare Corporation is your source for commercial trash compactors, balers, waste equipment, recycling equipment, industrial shredders and grinders, and other waste related products and services.
EXTRA HIGH DENSITY MID SIZE BALER - 48" VERTICAL
This vertical baler can bale a wide variety of materials. This baler is ideal for cardboard, plastics, metals, cans, textiles and other recyclable or waste material. The high density stroke means a more compact, dense bale.
48-2066 - 48" EXTRA HIGH DENSITY BALER
Request Automated Response with general pricing - (Secure)
Request Info on Multiple Products - (Secure Area)
When you need heavy duty output from a waste and recycling baler, but space is an issue, these Extra High Density 48" Balers can be a great solution for handling your waste & recycling requirements in a wide range of applications.
Comparison Chart on 48" Vertical Balers
Click
here to check out the different balers and the bale weights they produce on
various materials
Read about Balers
Extra High Density 48" Mid Size Baler - Specifications
Bale Size
30” x 48” x 48”
Bale Volume
40 Cubic Feet
Cycle Time
48 Seconds (No Load)
Estimated Bale Weights
Material
Bale Weight
Density Lbs/Cu Ft – Loose/Baled
Bales / Hr
OCC – Cardboard
Up to 1,000 Lbs
2.5 / 24
Up to 2
Shredded ONP - Newspaper
Up to 1,100 Lbs
4 / 26
Up to 2
Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables.
Extra High Density 48" Mid Size Baler - Hydraulics
Main Pumps
12.9 GPM @ 1,800 RPM Fixed Volume Vane
System Pressure
2600 PSI Maximum
Main Cylinder
7” Bore, 4.5” Rod, 66” Stroke
Ram Face Pressure
77.68 PSI
Overall Platen Force
100,048 lbs Oil Reservoir
41 Gallon Capacity
Hydraulic Manifold
D05 Pattern, Internal Relief Valve Subplate Circuit
48" Standard Vertical Baler Electrical
Main Motor
20 HP - 208/230/460v – 3 Phase
Enclosure
NEMA 12 - Rated
Controls
UL / CUL Listed
Motor Type
TEFC High Efficiency
Extra High Density 48" Mid Size Baler - Dimensions and Structural
Overall Height
164
Overall Width
68
Overall Depth
45
Depth with Door Open
90
Frame Design
10” Channel Side Rails - 12” Channel Headers
3” x 3” Tube Steel Discharge Door Supports
Solid Door Charge
8 Pieces of 4” Channel in Sub Floor
Feeding Opening
27” x 48” Charge Dimensions 23” x 48”
Weight
5,400 lbs
Extra High Density 48" Mid Size Baler - Other Features
48-2066 UL Listed (see Electrical chart above)
48-2066 Meets or exceeds all ANSI Z245.5 and OSHA standards. 48-2066 Product has NEMA 12 48-2066 Bale Height Adjustable 48-2066 Safety Interlock Circuit on Bale Door & Safety Gate 48-2066 Counterbalanced Feed Door for Easy Open 48-2066 3 – 6” Retainer Bale Dogs Front and Back 48-2066 Soft Shift, Low Shock Hydraulic Circuit
48-2066 Dual Chain Semi-Automatic Bale Ejection System 48-2066 Platen Roller Guides 48-2066 Spring Doors 48-2066 Factory Wired for Easy Installation 48-2066 Structural frames reinforced in high stress areas, plus other heavy duty 'extras'.
Extra High Density 48" Mid Size Baler - Other Options
Option Number
Description
48-2066-01
Slotted Discharge Door
48-2066-02
Single Phase Motor (Only available on 10 HP Balers)
48-2066-03
Front Load – Rear Eject
48-2066-04
Oil Heater
48-2066-05
Special Voltage – 575V
48-2066-06
Sharks Teeth
48-2066-07
Weatherproof
48-2066-08
Drum Crusher
48-2066-09
Extra Heavy Duty Package (Heavily beefed up Frame etc)
48-2066-10 Special Paint Color
Extra High Density 48" Mid Size Baler Diagram
A = 54" B = 68" C = 54" D = 108" E = 164" F = 45" G = 90" H = 76" I = 54"
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures.
