Printer Friendly / Create PDF
WasteCare Corporation is your source for commercial trash compactors, balers, waste equipment, recycling equipment, industrial shredders and grinders, and other waste related products and services.
LOW PROFILE ECONOMY BALER - 60" Vertical
60-ELP6 - 60" LOW PROFILE ECONOMY BALER
Request Automated Response with general pricing - (Secure)
Request Info on Multiple Products - (Secure Area)
This Low Profile Economy Baler is a great selection for a variety of recycling materials.
This 60" Low Profile Economy Baler is ideal for:
Hospitals
Medical
Centers
Motels / Hotels
Small Grocery Stores
Small Retail Stores
Schools & Colleges
Many other commercial applications
Comparison Chart on 60" Vertical Balers
60" Low Profile Economy Vertical Baler - Performance Information |
||||
Bale Size |
60-ELP6-BS |
30” x 33” x 60” |
||
Bale Volume |
60-ELP6-BV |
34 Cubic Feet |
||
Cycle Time |
60-ELP6-CT |
28 Seconds |
||
Estimated (Up to) Bale Weights |
||||
Material |
Bale Weight |
Density Lbs/Cu Ft – Loose/Baled |
Bales / Hr |
|
OCC - Cardboard |
700 Lbs |
2.5 / 20 |
Up to 2 |
|
Shredded ONP - Newspaper |
700 Lbs |
2.5 / 20 |
Up to 2 |
|
Plastic / Shrink Wrap |
600 Lbs |
1.5 / 14 |
Up to 2 |
|
| Clothes | 300 - 400 | 4 / 12 | Up to 2 | |
Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables. |
||||
60" Low Profile Economy Vertical Baler - Hydraulics |
||
Main Pumps |
60-ELP6-MP |
12.8 GPM |
System Pressure |
60-ELP6-SP |
2400 PSI Maximum; 2200 PSI Operating |
Main Cylinder |
60-ELP6-MC |
6” Bore; 3.5" Rod; 30” Stroke |
Ram Face Pressure |
60-ELP6-FP |
38 PSI |
Overall Platen Force |
60-ELP6-PF |
67,857 Lbs Max ; 62,202 Lbs Normal |
Oil Reservoir |
60-ELP6-OR |
22 Gallon Capacity |
60" Low Profile Economy Vertical Baler - Electrical |
||
Main Motor |
60-ELP6-MM |
15 HP - 208 / 230 / 460v – 3 Phase |
Controls |
60-ELP6-CL |
ETL Listed |
60" Low Profile Economy Vertical Baler - Dimensions & Structural |
||
Height |
60-ELP6-H |
105 |
Width |
60-ELP6-W |
80 |
Depth |
60-ELP6-D |
45 |
Depth (Door Open) |
60-ELP6-DO |
102 |
Feed Height |
60-ELP6-FO |
35” |
Weight (Approx 5,000) |
60-ELP6-WT |
4,000 lbs |
Other Features of the 60" Low Profile Economy Baler |
|
| 60-ELP6 | ETL Listed (see Electrical chart above) |
| 60-ELP6 | Product meets or exceeds all ANSI Z245.5 and OSHA standards. |
| 60-ELP6 | Safety Interlock |
| 60-ELP6 | Ejector System - Semi-Automatic |
| 60-ELP6 | Full Bale Switch |
| 60-ELP6 | 6 Bale Tie Slots |
| 60-ELP6 | Factory Wired for Easy Installation |
| 60-ELP6 | Structural frames reinforced in high stress areas, plus other heavy duty 'extras'. |
Other Options of the 60" Low Profile Economy Vertical Baler |
|
| 60-ELP6-SU | Set-Up |
60-ELP6-01 |
Special Electrical - Single Phase Motor (Only available on 10 HP Balers) |
60-ELP6-02 |
Slotted Discharge Door |
| 60-ELP6-03 | Full Bale Light |
| 60-ELP6-04 | Front Feed Chute |
| 60-ELP6-05 | Rear Feed Opening, Front Eject |
| 60-ELP6-06 | Rear Feed Chute Package (Makes Baler 'Conveyor Ready') |
| 60-ELP6-07 | Oil Heater |
| 60-ELP6-08 | Counter Weighted Floppy Retainer Doggs |
| 60-ELP6-09 | Weatherproof Package |
60-ELP6-10 |
Wire Guide System (allows for front bale tie off) |
60-ELP6-11 |
Lovejoy Coupling (Easily swap out either Pump or Motor versus having to replace both if one goes bad) |
60-ELP6-12
|
Special Paint |
60" Low Profile Economy Baler Diagram
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures.
