WasteCare Corporation - Trash Compactors, Balers, Recycling Equipment, Waste Equipment and Related Products

 

Home > Sitemap > Compactors > Commercial Compactors

COMPACTOR SPECIFICATIONS, DIMENSIONS & DIAGRAMS
Commercial Trash Compactors

 

Three Sizes on Casters (Standard)
Small Commercial Compactor Medium Stainless Steel Compactor Compactor Use

 

(Approximate:)
Small
Medium
Large
Height 71" 78" 78"
Width 23" 28" 40"
Depth 25" 30" 30"
Depth with Door Open 45" 55" 67"
Loading Door 19" W x 16" H 24" W x 19" H 36" W x 19" H
Cube Capacity 3.3 cu. ft. 6 cu. ft. 9 cu. ft.
Reduction Ratio (up to) up to 25: 1 up to 25: 1 up to 25:1
Motor 3 / 4 HP 2 HP 2 HP
Ram Pressure (up to) 9,800 lbs. 14,150 lbs. 25,200 lbs.
Cycle Time 16 Seconds 21 Seconds 25 Seconds
Electrical Power 115v / 230v 115v / 230v 115 / 230v
Cylinder Size 2.5" 3" 4"
Circuit Size 115 V - 20 Amp
230 V - 20 Amp
115v - 30 Amp
230v - 20 Amp
115v - 30 Amp
230v - 20 Amp
Actual Weight 675 lbs. 1,000 lbs. 1,300 lbs.
Full Cube Weight (up to) up to 125 lbs. up to 250 lbs. up to 350 lbs.
Optional Rear / Chute Feed Rear / Chute Feed

 

Trash Compactors Dimension Diagrams:

Small

Trash Compactor Diagram

 

Medium

Trash Compactor Diagram

 

Large

Trash Compactor Diagram

 

 



Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.

Performance may vary depending upon application.

Products must be installed and operated according to required standards, codes, regulations and safety procedures.


Copyright 1997-2013 WasteCare Corporation. All Rights Reserved.