 |
WasteCare Corporation Indoor Compactors | Balers | Outdoor Compactors Automatic Balers | Hi-Rise Compactors | Shredders | Smart-Pack |
|
|
||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Automatic Horizontal Baler (Open End) Model HO50-3713 |
||||
|
To jump to the Comparison Chart on all Open End Horizontal Balers Click Here
|
||||
 |
This Horizontal Baler is ideal for:
|
Bales a variety of materials including:
Corrugated Cardboard
Newspapers
Used Beverage Cans
Plastics
Metals
More....
Typically, the best use and purpose of Open End Horizontal Balers is very high volume, continuous applications utilizing Auto-Tie capabilities for producing up to 25 tons per hour.
In addition to maximizing bale weights size & speed, all balers are designed and produced with many other customer satisfaction factors in mind such as:
- Reducing waste disposal costs while minimizing acquisition and start-up costs of waste handling equipment
- Reducing labor costs
- Streamlining overall waste processing operations for better productivity
- Durability and reliability
- Improving cleanliness and business image
- Improving workplace safety
- Achieving quick paybacks
Whether it is baling foam, film, fiber, cardboard, plastics, metals, magazines, paper or other materials, the design, components and construction is meant to produce many years of trouble-free economical service for our customers.
|
Baler Performance |
|||
|
Bale Size |
30” x 40” x 72” (Variable) |
||
|
Bale Volume |
50 Cubic Feet |
||
|
Cycle Time |
13.33 Seconds (No Load) |
||
| Capacity | 9,377 Cubic Feet Per Hour (No Load) | ||
|
Estimated Bale Weights |
|||
|
Material |
Bale Weight |
Density Lbs/Cu Ft – Loose/Baled |
30 HP Bales / Hr |
|
Shredded OCC |
Up to 1,200 Lbs |
2.5 / 26 |
Up to 3.5 |
|
Shredded Newspaper |
Up to 1,300 Lbs |
4 / 26 |
Up to 4.5 |
|
Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables. |
|||
|
Hydraulics |
|
|
Main Pumps |
52.5 GPM - Double Vane - 1 @ 31.5 GPM (800PSI) & 1 @ 12 GPM (2600 PSI) |
|
System Pressure |
2600 PSI Maximum |
|
Main Cylinder |
7” Bore, 5” Rod, 70” Stroke |
| Bale Tension Cylinders | (4) - 5" Bore, 4" Stroke / (5) - 5" Bore, 2" Stroke |
|
Ram Face Pressure |
88.47 PSI Static |
|
Overall Platen Force |
100,059 Lbs |
|
Oil Reservoir |
300 Gallon Capacity |
|
Hydraulic Manifold |
Integral Relief, Regenerative Manifold |
| Filtration | 6 Micron |
| Air to Oil Cooler | Standard |
|
Electrical |
|
|
Main Motor |
30 HP - 230/460v – 3 Phase (Standard) |
| Motor Type | TEFC, High Efficiency, Across the Line Starting is Standard |
|
Inserter Drive Motor |
5 HP, C-Face, 1750 RPM, 230/460V, 3PH Brake Motor |
|
Twister Drive Motor |
2 HP, C-Face, 1750 RPM, 230/460V, 3PH Brake Motor |
|
Controls |
UL & CUL Listed - Allen Bradley SLC500 |
|
Structural |
||
|
Frame Design |
Channel and Tube Steel Construction | |
|
Floor & Platen |
Standard Replaceable T-1 Alloy Steel Wear Surface Construction | |
|
Shear Blade |
T-1 Alloy Tapered V-Blade Shear, Serrated Knife Block | |
|
Platen Guides |
Tongue & Groove Floor Guides & Adjustable Platen Hold Down | |
| Linen Phenolic Wear Side Guides | ||
| T-1 Top Wear Guides | ||
| SubFloor | Tube Steel Lattice Network | |
| Gib Bars | A-1018 | |
| Shipping Weight | 29,000 lbs (Approximately) | |
|
Baler Dimensions - Note: Specifications are sometimes rounded within a few inches +/- |
|
|
Overall Height |
115" |
|
Overall Width |
150 |
|
Length |
425 |
|
Feed Opening |
50" x 28" |
|
Note: Dimensions do not include options (such as Hopper extensions) or 'perimeter buffer' |
|
|
Other Baler Features (Note: Some items may be options if specified) |
| Product meets or exceeds all ANSI Z245.5 and OSHA standards. |
| Product has NEMA 12 |
| Bale Run Out Table |
| All Cylinders are trunion mounted for a stronger mount and more protection for the cylinder |
| All machines are shipped with hydraulic fluid in them |
| Regen Hydraulic Circuit for adding more speed to the system by bringing more fluid to cylinder |
| Air/Oil Cooler helps prevent the hydraulic oil from overheating (on all models except the 20HP) |
| Tongue and Groove Flooring helps keep material from getting under the platen |
| Wide Mouth In-Feed Openings for variety of materials and sizes |
| Automatic cycling, activated by electric eye in hopper feed chute |
| Safety interlocks which means the baler automatically stops when door or panel is opened |
| Rugged, reinforced baling chamber and door |
| Oversized locks, hinges and hydraulic components helps keep maintenance costs low |
| Lock-out Tag-Out provisions are incorporated |
|
Main Baler Options |
|
|
Option |
Description |
|
01 |
Remote Power Unit |
|
02 |
Hopper Extension |
|
03 |
Foam Hopper |
|
04 |
Ultra Sonic Actuator |
|
05 |
High Intensity Actuator |
|
06 |
High Temperature / Low Oil Level Alarm |
|
07 |
Soft Start - Reduced Amperage Starting |
|
08 |
Upper Photo Eyes |
| 09 | Finger Safe Fuse Guards |
| 10 | Weatherproof |
| 11 | Oil Heater |
| 12 | Special Paint |
| 13 | Special Voltage |
| 14 | Conveyors |
| 15 | Conveyor & Cart Dumper Controls (for existing Conveyor or Cart Dump) |
| 16 | Cart Dumper |
• Continuous Product improvement is our policy. Therefore, in our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications without notice.
•
Performance may vary depending upon application.
• Products must be installed and operated according to required standards,
codes, regulations and safety procedures.
| A | B | C | D | E | F | G | H | I | |
| HO50-3713 | 131.25 | 85.5 | 104 | 53 | 302.5 | 378 | 89 | 38.5 | 155 |
| Note: Specifications are sometimes rounded within a few inches or more - If necessary, confirm before order placement | |||||||||
|
