 |
WasteCare Corporation Indoor Compactors | Balers | Outdoor Compactors Automatic Balers | Hi-Rise Compactors | Shredders | Smart-Pack |
|
|
||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Horizontal Baler - Closed End (Model HC38-3811) |
||||
|
To jump to the Comparison Chart on all Closed End Horizontal Balers
Click Here
|
||||
 |
This Horizontal Baler is ideal for:
|
Bales a variety of materials including:
Bulk OCC / Cardboard
Foam
Shrink Wrap
Bulk ONP
Plastics
Metals (such as tin, steel, wire etc)
More....
The Closed End Horizontal Balers are typically used in applications involving a continuous feed either by hand, loader, conveyor belt or air system. Generally, in terms of volume, the Closed End Horizontal Balers are best suited for applications of up to 20 tons (OCC) per typical work shift. In addition to many other options that are listed with the Closed End Horizontal Balers, customers can request an optional slotted discharge door (which is slotted horizontally). This means that the bales are able to retain their highest density while being tied off via the slotted door.
In addition to maximizing bale weight, size & speed, this baler is designed and produced with many other customer satisfaction factors in mind such as:
- Reducing waste disposal costs while minimizing acquisition and start-up costs of waste handling equipment
- Reducing labor costs
- Streamlining overall waste processing operations for better productivity
- Durability and reliability
- Improving cleanliness and business image
- Improving workplace safety
- Achieving quick paybacks
Whether it is baling cardboard, plastics, metals, foam, film, fiber, magazines, paper or other materials, the design, components and construction is meant to produce many years of trouble-free economical service for our customers.
|
Baler Performance |
|||
|
Bale Size |
30” x 36” x 60” |
||
|
Bale Volume |
37.5 Cubic Feet |
||
|
Cycle Time |
11.44 Seconds (No Load) |
||
|
Estimated Bale Weights |
|||
|
Material |
Bale Weight |
Density Lbs/Cu Ft – Loose/Baled |
30 HP Bales / Hr |
|
Cloth |
Up to 1,100 Lbs |
4 / 28 |
Up to 2 |
|
Shredded OCC |
Up to 1,100 Lbs |
2.5 / 28 |
Up to 2 |
|
Shredded Newspaper |
Up to 1,200 Lbs |
4 / 30 |
Up to 2 |
|
Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables. |
|||
|
Hydraulics |
|
|
Main Pumps |
52.5 GPM - Double Vane - 1 @ 31.5 GPM & 1 @ 21 GPM |
|
System Pressure |
2600 PSI Maximum |
|
Main Cylinder |
8” Bore, 5.5” Rod, 46” Stroke 16" Penetration |
|
Ram Face Pressure |
128.76 PSI |
|
Overall Platen Force |
130,691 Lbs |
|
Oil Reservoir |
100 Gallon Capacity |
|
Hydraulic Manifold |
Cartridge Relief Valve Subplate Circuit |
| Filtration | 6 Micron |
| Air to Oil Cooler | Optional |
|
Electrical |
|
|
Main Motor |
30 HP - 230/460v – 3 Phase (Standard) |
|
Enclosure |
NEMA 12 - Rated |
|
Controls |
UL Approved, NEMA - CUL & UL Listed |
|
Motor Type |
TEFC, Heavy Duty - Greased fittings & bearings & totally enclosed fan coolers |
| PLC | Allen Bradley Micrologic 1200 |
| Photocell | Infared Type |
|
Structural |
||
|
Frame Design |
Channel and Tube Steel Construction | |
|
SubFloor |
Tube Steel Lattice Network | |
|
Platen Guides |
Tongue & Grooved Floor & Adjustable Platen Hold Down | |
| Linen Phenolic Wear Side Guides | ||
| T-1 Top Wear Guides | ||
| Gib Bars | A-1018 | |
|
Shear Blade |
T-1 Alloy Steel | |
| Shipping Weight | 14,500 lbs (Approximately) | |
|
Baler Dimensions - Note: Specifications are sometimes rounded within a few inches +/- |
|
|
Overall Height |
100 |
|
Overall Width |
60 |
|
Length - Door Open |
230 |
|
Feed Opening |
28 W x 30 L |
|
Note: Dimensions do not include options (such as Conveyors or Hopper extensions) or 'perimeter buffer' |
|
|
Other Baler Features (Some of which are optional where specified) |
| Product meets or exceeds all ANSI Z245.5 and OSHA standards. |
| Product has NEMA 12 |
| All Cylinders are trunion mounted for a stronger mount and more protection for the cylinder |
| All machines are shipped with hydraulic fluid in them |
| Regen Hydraulic Circuit for adding more speed to the system by bringing more fluid to cylinder |
| Air/Oil Cooler helps prevent the hydraulic oil from overheating (on all models except the 20HP) |
| Tongue and Groove Flooring helps keep material from getting under the platen |
| Wide Mouth In-Feed Openings for variety of materials and sizes |
| Automatic cycling, activated by electric eye in hopper feed chute |
| Safety interlocks which means the baler automatically stops when door or panel is opened |
| Rugged, reinforced baling chamber and door |
| Oversized locks, hinges and hydraulic components helps keep maintenance costs low |
| Lock-out Tag-Out provisions are incorporated |
|
Main Baler Options |
|
|
Option |
Description |
|
01 |
Remote Power Unit |
|
02 |
Hopper Extension |
|
03 |
Foam Hopper |
|
04 |
Ultra Sonic Actuator |
|
05 |
High Intensity Actuator |
|
06 |
High Temperature / Low Oil Level Alarm |
|
07 |
Soft Start - Reduced Amperage Starting |
|
08 |
Upper Photo Eyes |
| 09 | Finger Safe Fuse Guards |
| 10 | Weatherproof |
| 11 | Oil Heater |
| 12 | Special Paint |
| 13 | Special Voltage |
| 14 | Conveyors |
| 15 | Conveyor & Cart Dumper Controls (for existing Conveyor or Cart Dump) |
| 16 | Cart Dumper |
| 17 | Slotted Discharge Door |
| 18 | Bale Run Out Table |
• Continuous Product improvement is our policy. Therefore, in our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications without notice.
•
Performance may vary depending upon application.
• Products must be installed and operated according to required standards,
codes, regulations and safety procedures.
| A | B | C | D | E | F |
Length Door Open |
G | H | I | |
| HC38-3811 | 43.625 | 55 | 44.50 | 80.50 | 175.50 | 184.50 | 225.50 | 95.50 | 98 | 72 |
| Note: Specifications are sometimes rounded within a few inches or more - If necessary, confirm before order placement | ||||||||||
|
