Printer Friendly / Create PDF
WasteCare Corporation is your source for commercial trash compactors, balers, waste equipment, recycling equipment, industrial shredders and grinders, and other waste related products and services.
STANDARD 60" VERTICAL CARDBOARD BALER
60-1048 Specifications, Details & Diagram
Request a Detailed Quote or other information - (Secure Area)
Request an Automated Response with general price information
Jump Back to Overview Page for this Baler
For our Quick Lookup Comparison Chart on 60" Vertical Balers Click Here
Standard Cardboard Baler Performance Information |
|||
Bale Size |
30” x 48” x 60” |
||
Bale Volume |
50 Cubic Feet |
||
Cycle Time |
48 Seconds (No Load) |
||
Estimated Bale Weights |
|||
Material |
Bale Weight |
Density Lbs/Cu Ft – Loose/Baled |
Bales / Hr |
OCC – Cardboard |
Up to 900 Lbs |
2.5 / 20 |
Up to 2 |
Shredded ONP - Newspaper |
Up to 1,000 Lbs |
4 / 23 |
Up to 2 |
Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables. |
|||
Standard Cardboard Baler - Hydraulics |
|
Main Pumps |
9.8 GPM @ 1,800 RPM Fixed Volume Vane |
System Pressure |
2200 PSI Maximum |
Main Cylinder |
6” Bore, 3.5” Rod, 48” Stroke |
Ram Face Pressure |
38.30 PSI |
Overall Platen Force |
62,194 Lbs |
Oil Reservoir |
30 Gallon Capacity |
Hydraulic Manifold |
D05 Pattern, Internal Relief Valve Subplate Circuit |
60" Standard Vertical Baler - Electrical |
|
Main Motor |
10 HP - 208/230/460v – 3 Phase |
Enclosure |
NEMA 12 - Rated |
Controls |
UL / CUL Listed |
Motor Type |
TEFC High Efficiency |
Standard Cardboard Baler - Dimensions & Structural |
|
Overall Height |
143 |
Overall Width |
80 |
Overall Depth |
45 |
Depth with Door Open |
102 |
Frame Design |
10” Channel Side Rails - 12” Channel Headers |
3” x 3” Tube Steel Discharge Door Supports |
|
Solid Door Charge |
|
8 Pieces of 4” Channel in Sub Floor |
|
Feeding Opening |
27” x 60” Charge Dimensions 23” x 60” |
Weight |
5,000 lbs |
Other Features of the Standard Cardboard Baler |
UL Listed |
| Meets or exceeds all ANSI Z245.5 and OSHA standards. |
| NEMA 12 |
| Bale Height Adjustable |
| Safety Interlock Circuit on Bale Door & Safety Gate |
| Counterbalanced Feed Door for Easy Open |
| 3 – 6” Retainer Bale Dogs Front and Back |
Soft Shift, Low Shock Hydraulic Circuit |
| Dual Chain Semi-Automatic Bale Ejection System |
| Platen Roller Guides |
| Spring Doors |
| Factory Wired for Easy Installation |
| A-36 structural frames. A-514 reinforced in high stress areas. Strong rigid container walls provide performance & longer life span. A-1018 used for gib bar, guide and control surfaces. |
Other Options of the Standard Cardboard Baler |
|
Option Number |
Description |
60-1048-01 |
Slotted Discharge Door |
60-1048-02 |
Single Phase Motor (Only available on 10 HP Balers) |
60-1048-03 |
Front Load – Rear Eject |
60-1048-04 |
Oil Heater |
60-1048-05 |
Special Voltage – 575V |
60-1048-06 |
Sharks Teeth |
60-1048-07 |
Weatherproof |
60-1048-08 |
Drum Crusher |
60-1048-09 |
Extra Heavy Duty Package (Heavily beefed up Frame etc) |
60" Standard Vertical Baler Diagram - 60-1048
A = 68" B = 80" C = 54" D = 108" E = 143" F = 45" G = 102" H = 76" I = 54"
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures.
