HC60-38FM FOAM & FIBER HORIZONTAL CLOSED END BALER

HC60-38FM FOAM & FIBER HORIZONTAL CLOSED END BALER

This Horizontal Baler is ideal for:

 

In addition to being a specialty baler for Foam, Fiber and Film this baler can also bale other materials very well, including:

 

 

 

 

            HC60-38FM
 

View Comparison Chart on all Foam & Fiber Horizontal Balers

Request Detailed Quote or other information - (Secure Area)

Request Automated Response with general price information

This Horizontal Foam Baler (adapted for Foam / Fiber / Film) is loaded with awesome power, speed and special features for facilitating the baling of these materials.  The Foam / Film / Fiber ('3F') Balers have many important design features that separate them from other balers.

  • Polyurethane bale weights of up to 1,500 pounds.
  • Produces heavier, denser bales in about 1 / 4 of the time of a non-specialty baler trying to do the same job. 
  • A longer cylinder and stroke helps force the air out of the material as it is compressed and also helps remove the 'memory' from the material.
  • Special features work together to overcome critical elements associated with these materials.
  • Special shearing capabilities.
  • Special way to help keep material from becoming wedged or trapped in the baler (which could otherwise cause jamming).
  • Larger In-feed openings than the typical baler openings. This helps eliminate the need for a shredder in order to reduce the size of the foam particulates being baled.
  • Many other differences in the design that separate this series of balers from others

 

 

Baler Performance

Bale Size

48” x  36” x  60”

Bale Volume

60 Cubic Feet

Cycle Time

26 Seconds (No Load)

Estimated Bale Weights

Material

Bale Weight

Density Lbs/Cu Ft – Loose/Baled

30 HP  Bales / Hr

Polyurethane Foam

Up to 1,500 Lbs

1.8 / 25

Up to 2

Bulk OCC

Up to 1,600 Lbs

2.5 / 27

Up to 2

Bulk ONP

Up to 1,850 Lbs

3 / 31

Up to 2

Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables.

 

Hydraulics   

Main Pumps

52.5 GPM - Double Vane - 1 @ 31.5 GPM (800PSI) & 1 @ 21 GPM (2600 PSI)

System Pressure

2600 PSI Maximum

Main Cylinder

8” Bore, 5” Rod,  105” Stroke

Ram Face Pressure

83.56 PSI

Overall Platen Force

130,690 Lbs

Oil Reservoir

150 Gallon Capacity

Hydraulic Manifold

Integral Relief, Regenerative Manifold

Filtration 6 Micron
Air to Oil Cooler Standard

Electrical

Main Motor

30 HP  -  230/460v – 3 Phase (Standard)

Enclosure

NEMA 12 - Rated

Controls

UL Approved  -  CUL & UL Listed

Motor Type

TEFC - Heavy Duty - Greased fittings & bearings & totally enclosed fan coolers

PLC Allen Bradley SLC500

 

Structural

Frame Design

Channel and Tube Steel Construction

Floor Design

Tube Steel Lattice Network

Shear Blade

T-1 Alloy Steel, Replaceable

Retainer Dogs

Elephant Ear Dog Assembly

Platen Guides

Tongue & Groove Floor Guides & Adjustable Platen Hold Down
Linen Phenolic Wear Side Guides
T-1 Top Wear Guides
Gib Bars A-1018
Shipping Weight 25,000 lbs (Approximately)

 

Baler Dimensions  - Note: Specifications are sometimes rounded within a few inches +/-

Overall Height

100

Overall Width

80

Length

315

Length with Door Open

350

Feed Opening

46” W x 72" L  

Note: Dimensions do not include options (such as Conveyors and Hoppers) or 'perimeter buffer'

 

Other Baler Features   (Some of which are optional where specified)

Product meets or exceeds all ANSI Z245.5 and OSHA standards.
Product has NEMA 12
All Cylinders are trunion mounted for a stronger mount and more protection for the cylinder
All machines are shipped with hydraulic fluid in them
Regen Hydraulic Circuit for adding more speed to the system by bringing more fluid to cylinder
Air/Oil Cooler helps prevent the hydraulic oil from overheating (on all models except the 20HP)
Tongue and Groove Flooring helps keep material from getting under the platen
Wide Mouth In-Feed Openings for variety of materials and sizes
Automatic cycling, activated by electric eye in hopper feed chute
Safety interlocks which means the baler automatically stops when door or panel is opened
Rugged, reinforced baling chamber and door
Oversized locks, hinges and hydraulic components helps keep maintenance costs low
Lock-out Tag-Out provisions are incorporated
Elephant Ear Dog Assembly / Retainer Dogs

 

Main Baler Options

Option

Description

SU

Set-Up - (Conditions applicable)

01

Remote Power Unit

02

Hopper Extension

03

Foam Hopper

04

Ultra Sonic Actuator

05

High Intensity Actuator

06

High Temperature / Low Oil Level Alarm

07

Soft Start - Reduced Amperage Starting

08

Upper Photo Eyes

09
Finger Safe Fuse Guards
10
Weatherproof
11
Oil Heater
12
Special Paint
13
Special Voltage
14
Conveyors
15
Conveyor & Cart Dumper Controls (for existing Conveyor or Cart Dump)
16
Cart Dumper
17
Slotted Ejection Door  (Slotted Horizontally)
18
Bale Run Out Table
19
Fluffer

Horizontal Dimension Diagram:

A
B
C
D
E
F
G
Length
Door Open
H
I
HC60-38FM
61.5
72.75
44.5
63.5
285.5
294
95.5
353
164
81
Note: Specifications are sometimes rounded within a few inches or more - If necessary, confirm before order placement