Vertical Bottle Can Baler is ideal for..

Bottles and cans that are filled with liquids that need to be drained during the baling process. This baler can process huge volumes of bottles and cans that are filled with liquids. The baler drains and bales in one step.   

Typical Bale Sizes and Weights: These balers typically generate bale sizes up to about 4 or 5 Cubic Feet (24" x 16" x up to 24") that weigh up to 120 lbs for aluminum cans and about 230 lbs for plastic PET bottles.  

Material / Uses: PET Bottles, Aluminum Cans at a throughput rate of about 4,000 - 5,000  per hour for PET bottles and around 6,000 - 8,000 per hour for aluminum cans.

Horizontal Bottle Can Baler with Tipper is ideal for..

Very large volumes of bottles and cans that are full of liquids that need to be drained during the baling process..

Typical Bale Sizes and Weights: These balers typically generate bale sizes up to around 9 Cubic Feet (30 x 18 x up to 30") that weigh up to 180 lbs for aluminum cans and up to 340 lbs for plastic PET bottles.   

Material / Uses:   PET Bottles, Aluminum Cans at a throughput rate of about 12,000 cans per hour and a larger system that makes a bale that is 3 times the size of the standard model which  can process over 19,000 cans per hour.

Multi-Chamber Bottle Can Baler  are ideal for..

Bottles with the caps on as well as cans, and especially in situations where extra bays are contemplated for much greater volume and ability to easily separate and compact the recyclables in one easy step.  

Typical Bale Sizes and Weights: Bale sizes of 16" W X 16" D x 14" 22" H or roughly 3 cubic feet. Plastic Bottles up to 30 lbs and Aluminum Cans up to 25 lbs. With 2 chambers it bales approximately 2,000 - 2,500 Bottles or Cans per hour (or roughly 5 - 6 bales per hour that range from 400 - 425 cans or PET Bottles per bale).

Primary Material Uses: PET Bottles and Aluminum Cans. 

Mini-Baler for Plastic Wrap  are ideal for....

Smaller volumes and smaller bales of Plastic Wrap where there is also a need for something that is simple to operate.

Typical Bale Sizes and Weights: Bale Sizes are 27" W x 27" D x up to 35" H or roughly 13- 15 cubic feet. Bale weights of Plastic Wrap / Stretch Wrap up to 80 - 90 lbs and Cardboard up to 165 lbs. ding upon baled material).  They are small enough to be fairly portable when ordered with casters.

Primary Material Uses: Plastic Wrap / Stretch Wrap and Corrugated Cardboard. 

60" " Vertical Stretch Wrap / Plastic Wrap Balers  are ideal for...

Manufacturing Facilities, Packaging and Shipping Facilities, Grocery Stores / Supermarkets, Department Stores, Shopping Centers, Military Bases, and many other types of applications.

Typical Bale Sizes and Weights: Bale Sizes are 60" W x 30" D x up to 48" H or roughly 50 Cubic Feet. Bale weights are up to 800 pounds.

Primary Material Uses: Shrink Wrap / Stretch Wrap & Corrugated Cardboard. 

Balers - 60" Foam, Fiber & Film Vertical Balers are ideal for....

Supermarkets, Department Stores, Manufacturing Facilities, Shopping Centers, Colleges & Universities, Hotels & Motels, Recycling Centers and many other types of applications.

Foam, Film, Fiber Balers can:

• Reduce waste disposal costs (since the material is removed from waste stream) 
  
• Reduce labor costs associated with the handling of this material during disposal.
  
• Generate revenues from the sale of the recycled materials.
  
• Streamline overall waste processing operations.
  
• Help with the reduction of fire hazards  (due to accumulation of materials)
  
• Help improve workplace safety and neatness.

Balers - 72" Vertical Balers are ideal for...

Manufacturing Facilities, Warehouses, Department Stores, Shopping Centers, Supermarkets, Recycling Centers, Hotels & Motels, Hospitals & Health Care Facilities, Transfer Stations, Military Bases and many other types of industrial and commercial locations.

Typical Bale Sizes and Weights: These balers typically generate bale sizes of about 60 - 90 Cubic Feet that can range up to approximately 2,000 pounds (depending upon baled material).  

Primary Material Uses: Corrugated Cardboard, PET Plastic,  Newspaper, Foam, Shrink Wrap, Waste Paper, Steel & Aluminium Cans. 

Balers - 84" Vertical Balers are ideal for...

Manufacturing Facilities, Warehouses, Department Stores, Shopping Centers, Supermarkets, Recycling Centers, Hotels & Motels, Hospitals & Health Care Facilities, Transfer Stations, Military Bases and many other types of industrial and commercial locations.

Typical Bale Sizes and Weights: These balers typically generate bale sizes of about 200 Cubic Feet that can range up to approximately 2,000 pounds (depending upon baled material).  

Primary Material Uses: Corrugated Cardboard, PET Plastic,  Newspaper, Foam, Shrink Wrap, Waste Paper, Steel & Aluminium Cans. 

Smart-Packs (Automatic Compacting Receptacle) are great for Fast Food Dining Areas, Mall Food Courts, Airports, Amusement Parks, Casino's and any other Public areas where patrons make their own trash deposits (versus waiter / waitress).

These compactors automatically compact based on traffic flow and will hold about 300 gallons of trash before needing to be emptied. They are great for reducing labor, reducing waste hauling charges and overall streamlining. In addition, the units can talk, and thus can be programmed to broadcast verbal messages to patrons. They are also very quiet (not noticeable by nearby patrons) and they have an odor control system in them. They are designed for small incremental trash deposits versus large bags of trash.

Specialty Vertical Balers  -  for...

Foam (Carpet Rebond / Polyurethane / Polyethylene, etc)

Shrink Wrap

Styrofoam

Bottles & Cans (Aluminium, Steel, PET)

Core Tubes

Radiators

Scrap Metals

Aluminium Siding

Stainless Steel

More.............

Closed End Horizontal Balers  are Ideal for..

Municipalities, Distribution Centers, Manufacturing Facilities, Warehouses, Scrap Yards, Recycling Centers, Shopping Centers, Transfer Stations and many other types of applications.

Typical Bale Sizes and Weights: These balers typically generate bale sizes of  40 - 70 Cubic Feet that range up to approximately 2,000 pounds (depending upon baled material). 

Primary Material Uses: Bulk and Shredded Corrugated Cardboard, Bulk and Shredded Newspaper, Perforated PET, Cloth, Aluminium Sheets, Carpet Salvage, Polyurethane Foam, Polyethylene Foam, Cans 

Best Use: The best use of Closed End Horizontal Balers is typically applications involving a continuous feed either by hand, loader, conveyor belt or air system. They are best suited for applications of up to 20 tons (OCC)  per (typical) work shift. 

Open End Horizontal Balers  are ideal for....

Municipalities, Distribution Centers, Manufacturing Facilities, Warehouses, Scrap Yards, Recycling Centers, Shopping Centers, Transfer Stations and many other types of applications.

Typical Bale Sizes and Weights: These balers typically generate bale sizes of 50 - 80 Cubic Feet that range up to approximately  2,000 pounds (depending upon baled material). 

Primary Material Uses: Bulk and Shredded Corrugated Cardboard, Bulk and Shredded Newspaper, Conditioned Newspaper, Perforated PET, Aluminium Sheets, Carpet Salvage, Cans 

Best Use: Typically, the best use and purpose of Open End Horizontal Balers is very high volume, continuous applications utilizing Auto-Tie  capabilities for producing up to 25 tons per hour.

Full Eject Horizontal Balers are ideal for....

Municipalities, Distribution Centers, Manufacturing Facilities, Warehouses, Scrap Yards, Recycling Centers, Shopping Centers, Transfer Stations and many other types of applications.

Typical Bale Sizes and Weights: These balers typically generate  bale sizes of  roughly 50 Cubic Feet that range up to approximately  2,000 pounds (depending upon baled material).  

Primary Material Uses: Bulk Corrugated Cardboard, Bulk ONP, Aluminium Sheet & Ext., UBC, Perforated PET 

Best Use: Typically, the best use and purpose of Full Eject Horizontal Balers is very high volume, multi-material applications.

Specialty Horizontal Balers for...

Foam (Carpet Rebond / Polyurethane / Polyethylene, etc)