WasteCare Corporation is your source for commercial trash compactors, balers, waste equipment, recycling equipment, industrial shredders and grinders, and other waste related products and services.
SHRINK WRAP BALER
60" Baler
There are still a lot of companies throwing their plastic and shrink wrap into bins and sending it off to landfills therefore missing out on the incredible opportunity of baling and recycling shrink wrap. Shrink wrap is not very heavy when loose. If it is baled then it takes up so much less space and can actually may be worth a lot of money by recycling.60V-15SW - BALER FOR STRETCH WRAP / SHRINK WRAP
Request Automated Response with general pricing - (Secure)
Request Info on Multiple Products - (Secure Area)
This Shrink Wrap Baler is Ideal for:
- Manufacturing Facilities
- Grocery Stores / Supermarkets
- Packaging and Shipping Facilities
- Department Stores
- Shopping Centers
- Colleges & Universities
- Hotels / Motels
- Military Bases
- Many other types of Industrial / Commercial Applications.
Comparison Chart on 60" Vertical Balers
Click
here to check out the different balers and the bale weights they produce on
various materials
60V-15SW is the perfect choice for an economical Shrink Wrap Baler.
If you have Shrink Wrap or Plastic Wrap that needs to be baled, this Baler is Loaded with Power and Features.
Additional details on Baling Plastics
60" Shrink Wrap / Plastic Film Baler - Specifications
Shrink Wrap Baler Performance |
|||
Bale Size |
30” x 48” x 60” |
||
Bale Volume |
50 Cubic Feet |
||
Cycle Time |
48 Seconds (No Load) |
||
Estimated Bale Weights |
|||
Material |
Bale Weight |
Density Lbs/Cu Ft – Loose/Baled |
Bales / Hr |
Shrink Wrap |
Up to 800 lbs | 1.5 / 16 |
Up to 2 |
OCC – Cardboard |
Up to 1,000 Lbs |
2.5 / 24 |
Up to 2 |
Shredded ONP - Newspaper |
Up to 1,100 Lbs |
2.5 / 26 |
Up to 2 |
Note: Performance Rates, Bale Weights, and Bale Densities are subject to many factors such as Material Pre-Bale Densities, Feed rates, Moisture Content and other variables. |
Shrink Wrap Baler Hydraulics |
|
Main Pumps |
9.6 GPM @ 1,800 RPM Fixed Volume Vane |
System Pressure |
2600 PSI Maximum |
Main Cylinder |
6” Bore, 3.5” Rod, 48” Stroke |
Ram Face Pressure |
45.26 PSI |
Overall Platen Force |
73,502 Lbs |
Oil Reservoir |
30 Gallon Capacity |
Hydraulic Manifold |
D05 Pattern, Internal Relief Valve Subplate Circuit |
Shrink Wrap Baler Electrical |
|
Main Motor |
15 HP - 208/230/460v – 3 Phase |
Enclosure |
NEMA 12 - Rated |
Controls |
UL / CUL Listed |
Motor Type |
TEFC High Efficiency |
Shrink Wrap Baler Dimensions & Structural |
|
Overall Height |
143 |
Overall Width |
80 |
Overall Depth |
45 |
Depth with Door Open |
102 |
Frame Design |
10” Channel Side Rails - 12” Channel Headers |
3” x 3” Tube Steel Discharge Door Supports |
|
Solid Charge Door - Cross Broken |
|
8 Pieces of 4” Channel in Sub Floor |
|
Feeding Opening |
27” x 60” Charge Dimensions 23” x 60” |
Weight |
5,000 lbs |
Other Features of the Shrink Wrap Baler |
UL Listed (see Electrical chart above) |
Baler meets or exceeds all ANSI Z245.5 and OSHA standards. |
Baler has NEMA 12 |
Bale Height Adjustable |
Safety Interlock Circuit on Bale Door & Safety Gate |
Counterbalanced Feed Door for Easy Open |
3 – 6” Retainer Bale Dogs Front and Back |
Soft Shift, Low Shock Hydraulic Circuit |
Dual Chain Semi-Automatic Bale Ejection System |
Platen Roller Guides |
Spring Doors |
Factory Wired for Easy Installation |
A-36 structural frames. A-514 reinforced in high stress areas. Strong rigid container walls provide performance & longer life span. A-1018 used for gib bar, guide and control surfaces. |
Other Options of the Shrink Wrap Baler |
|
Option Number |
Description |
60V-15SW-01 |
Slotted Discharge Door |
60V-15SW-02 |
Single Phase Motor (Only available on 10 HP Balers) |
60V-15SW-03 |
Front Load – Rear Eject |
60V-15SW-04 |
Oil Heater |
60V-15SW-05 |
Special Voltage – 575V |
60V-15SW-06 |
Sharks Teeth |
60V-15SW-07 |
Weatherproof |
60V-15SW-08 |
Drum Crusher |
60V-15SW-09 |
Heavy Duty Package (Beefed up Frame etc) |
Shrink Wrap Baler Diagram - 60V-15SW
A = 68" B = 80" C = 54" D = 108" E = 143" F = 45" G = 102" H = 76" I = 54"
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures.