WasteCare Corporation
Shredders & Grinders
High Volume
H54-440 - HIGH VOLUME SHREDDER
Request Detailed Quote or other information - (Secure Area)
Request Automated Response with general price information
Standard Features
- Electrical Control Panel - Waterproof with emergency stop, Start & Stop pushbuttons for Electric Motor Start and Shredder On & Off
- Keyed Switch for On & Off Protection during off hours
- Circuit provided with Auto-Reverse Safety Feature with reversal time control relays and auto shutdown sequencing, when preset reversal levels are encountered due to unshreddable conditions.
- Variable RPM Range of Design depending on HP Selection and Gearbox Selection.
- Motor Starter Panel - Reversing Motor Starters in Panels with Circuit Breaker Protection
- Splash Plate Bearing Protection in Cutting Chamber
- Very Low Noise Rated Level
- Large 54" x 44" InFeed Opening (Actual Opening at Cutting Chamber is 60" x 44")
- Bearings - Spherical Roller Bearings in Machined Steel Housing with Shaft Seals
- Shredder Head designed in two L Shape Halves for easy assembly and maintenance of Shredder Head. The two L Shape Halves form the Square Shedder Head.
- Design can accommodate variable lengths for special needs
- Material for Shafts, Cutters, Spacers & Cleaning Fingers is Alloy Steel 4140
- Each L Shape Halves of the Shedder Head allow for full access to their Cutters, Spacers, Shafts, Bearings, Couplings and Drive Motor Assemblies
- Wide range of HP capability on each shaft depending on speed of gearbox
| Shear Shredder - Model H54-440 - Specifications | |
| Drive Motor - (HP / KW) - Standard 3 PH | 150 |
| Highest HP Available | 300 |
| Lowest HP Available | 20 |
| MSW Production Rate (from reported facilities) | 20 Tons per Hour |
| Tires Production Rate (from reported facilities) | 400 per Hour |
| Bulk or Metered Feeding from Reported Facilities | Metered |
| Length of Smallest Infeed Opening | 54" |
| Width of Smallest Infeed Opening | 44" |
| Maximum Design Infeed Opening | 72" |
| Shaft Center Distance | 16" |
| Shaft Size for Hex Shaft (Flat to Flat Distance) | 7.5" |
| Cutter Diameter (Tip to Tip Double Hook) | 22" |
| Cutter Thickness (Single Stack Layout) | 2" |
| Electric Drive | Yes |
| RPM of Cutter Shafts | 4 RPM |
| Single or Dual Drive | Dual & High Ratio Gearboxes (Each Shaft) |
| Shaft & Cutter Material | 4140 Alloy Steel - Heat treated for Optimum Strength |
| Spacers & Cleaning Fingers Material | 4140 Alloy Steel - Heat treated for Optimum Strength |
| Overall Length (Main Machine - Rounded) | 20' |
| Overall Width (Main Machine - Rounded) | 8' |
| Overall Height (Main Machine - Rounded) | 11' |
| Main Machine Weight / Approx: - (lbs) | 35,000+ lbs |
Most Common Options
- Optional Hopper Sizes & Stand Legs (Standard is 48" - 60")
- Optional HP Motor
- Optional RPM design range depending upon HP & Gearbox
- Larger Infeed Opening
- Spare Parts Kit
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures.
Printer Friendly / Create PDF