 |
WasteCare Corporation Indoor Compactors | Balers | Outdoor Compactors Automatic Balers | Hi-Rise Compactors | Shredders | Smart-Pack |
|
|
||
|
| |||||||||||||||||||||||||||||||||||||||
|
Stationary
Compactors
- 3 Cubic Yd |
|
|
(Model 3-STXD)
|
Note: Our Compactors Preliminary Considerations Checklist may be helpfulA variety of Options such as:
• Enclosed Doghouse With Door and Safety Interlock
• Enclosed Doghouse for Chutes
• Side Loading Hopper
• Rear Loading Hopper with 42" lip, railing and walk-on ramp, with 18" extension
• Above with gate & security interlock switch
• Security Door & Frame
• Remote Control with 13' Cord
• Reservoir Oil Heater
• Power Unit Weather Cover
• 10 HP Single Phase Motor & Pump Assembly
3-STXD Specifications
Charge Opening 60" x 60" (1525mm x 1525mm) Ram Face 59 3/4" x 29" with 1/2" Plate (1518mm x 737mm x 13mm) Floor 1/2" Plate (13mm) Sides 1/4" Plate 6"Channel Breaker Bar 6" x 6" x 5/8" Boxed Angle Ram Penetration 12" (305mm) Cylinder 6" (152mm) Bore, 72" (1829mm) Stroke
Ram Force 67,800lbs. Max(30,754Kg) (29.2 PSI) Cycle Time 60 Seconds Motor 15HP 208/230/460Volt, TEFC Pump 12 GPM Oil Capacity 60 Gallons (227L) Loading Height 48" (1220mm) Overall Height 55" (1400mm) Length 159" (4040mm) Width 75" (1910mm) Shipping Weight 5300lbs. (2,404Kg)
• Continuous Product improvement is our policy. Therefore, in our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications without notice.
• Performance may vary
depending upon application.
• Products must be installed and operated according to required standards,
codes, regulations and safety procedures.
|
