Printer Friendly / Create PDF
WasteCare Corporation
HIGH RISE COMPACTORS - REDUCED FOOTPRINT
This Model is Applicable for Higher Volume Applications
IHR-40RF - REDUCED FOOTPRINT HI-RISE COMPACTOR
Request a Detailed Quote for these Compactors or other information - (Secure Area)
Request an Automated Response with general price information
This is the Reduced Footprint version of the High Capacity or High Volume Model of High Rise Compactors which are best suited to help the taller height and higher volume High Rise Buildings (with chute systems).
Trash from the building chute system is collected at the bottom of the chute by the hopper portion of the compactor which is automatically compacted. The result is a cube of trash that is easily removable which can be transported to the disposal area of the building.
Looking for a standard footprint High Rise Compactor? Click here for Standard Footprint Compactor.
Refer to Indoor Compactor Benefits for other advantages.
REDUCED FOOTPRINT COMPACTOR
STANDARD FEATURES
- Automatic cube (trash) ejector
- Computer Controlled Hydraulics
- Single Phase Electrical (230V-60Hz)
- 5 HP Motor
- Drip Tray
- Two Stage Hydraulic Pump
- Quick Disconnect Chamber
- Air Sanitizer / Odor Control System
- Bag Dispenser
- Durable Inside Container (for Lining Trash Bags)
- Vertical Feed Chute
REDUCED FOOTPRINT COMPACTOR ACCESSORIES
- Hydraulic Lift Cart
- 208 / 230V - 3 Phase
- Cover for Inside Container
- Stainless Steel Cart
- Trash Bags
- Tape Dispenser
- Tape 2" Heavy Duty / 36 Rolls per Case
- more......
REDUCED FOOTPRINT COMPACTOR SPECIFICATIONS
High Volume High Rise Compacting System Specifications Reduced Footprint - IHR-40RF |
|
| Height | 95 in |
| Width | 52 in |
| Length | 74 in |
| Length with Door Open | 106 in (9 feet) |
| Square Footage Footprint (excludes any extra Buffer) | 40 Sq |
| Charge Opening | 22" x 29" |
| Loading Door Opening | 24" W x 17" H |
| Cube Capacity | 9 cu. ft. |
| Cube Eject | Hydraulic |
| Reduction Ratio | up to 10:1 |
| Motor | 5 HP TEFC |
| Ram Pressure Vertical | 31,800 Lbs. |
| Rear Chute Ram Pressure | 31,500 Lbs. |
| Hydraulic Eject Ram Pressure | 14,137 Lbs. |
| Cycle Time | 45 seconds |
| Main Cylinders Size - Vertical (Twin Cylinders) | (2) 4.5" Bore; 3" Rod; 33" Stroke |
| Rear Chute Cylinders Size - Horizontal (Twin) | (2) 3" Bore; 2" Rod; 18.25" Stroke |
| Hydraulic Eject Cylinder Size | 3" Bore; 2" Rod; 28.25" Stroke |
| Electric Power | 230 V 1 Phase - 20 amp |
| Cube Tying | Bag |
| Full Cube Weight | up to 350 Lbs. |
| Shipping Weight | Approx 4,000 Lbs. |
REDUCED FOOTPRINT COMPACTOR DIAGRAM
Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.
Performance may vary depending upon application.
Products must be installed and operated according to required standards, codes, regulations and safety procedures
Note: Dimensions may be rounded (and unless indicated) do not include any recommended 'perimeter buffer'.